exit temperature meaning in Chinese
出口温度
出射温度
Examples
- Turbine exit temperature
涡轮出口温度 - Wall temperature had a remarkable effect on smog exit temperature , whereas its effect on other parameters was not obvious
壁面温度对最高燃烧温度、壁面最大热流和平均热流影响不明显，但烟气出口温度随壁面温度的升高而增加较大。 - If keeping compressor ' s rotating speed unchanged , wet compression can increase compressor discharge pressure and lower exit temperature at the same time
在保持压气机转速一定情况下，压气机排气压力升高，与此同时排气温度下降。 - Check and error analysis indicate that this model can predict billet exit temperature 10 ~ 25 minutes in advance , and the predicting error can satisfy the demands of industrial application accuracy
校验和误差分析表明，该模型能提前5 ~ 25分钟预测出钢坯的出口温度，且预测误差满足工业应用的精度要求。 - Under the condition of constant phosphorus mass flow rate , the smog exit temperature would increase slowly while other parameters would decrease with increasing excess air coefficient
在燃磷量不变情况下，最高燃烧温度、壁面最大热流和平均热流均随过剩空气系数的增大而减小，但烟气出口温度缓慢增加。